A homeowner in Fairview North Carolina found us online while searching for a local Asheville-area company that could lift and transport hardwood flooring. The flooring was waiting at Bee Tree Hardwoods, a mill in Swannanoa. What made the job memorable was where the wood came from.
The flooring was cut from the homeowner’s own trees, which came down on their property during Hurricane Helene two years ago. Rather than paying to have the trees hauled off, they had them milled into hardwood flooring for their house.
Why More Helene Trees Didn’t Become Lumber
After Helene, Western North Carolina was covered in downed timber. Plenty of homeowners looked at the oaks, poplars and maples lying across their yards and wondered whether they could put that wood to use. Some did, and this homeowner is one of them. But it happens a lot less often than you might expect.
The main reason is that turning your own trees into lumber isn’t necessarily cheaper than buying lumber off the shelf, and it’s definitely not free. Here’s what the process involves:
- Cutting and bucking. The trees have to be cut into log lengths a sawmill can handle, often on land full of other storm damage.
- Lifting and transport. Logs are heavy. Getting them out of a property and onto a truck usually takes a crane, grapple or loader, plus a truck to haul them to the mill.
- Milling. The sawyer cuts the logs into rough boards. Yard trees often hide nails, fence wire and other metal, which can damage saw blades, so some mills charge extra for them or won’t take them.
- Drying. This step takes the longest. Boards are usually air-dried and then kiln-dried before they’re stable enough for flooring. Air drying alone is often estimated at about a year per inch of thickness.
- Milling into flooring. Dried boards still need to be planed, have the tongue and groove cut, and have the ends trued so they fit together tightly.
- Transport back home and installation. Only then does the finished wood come back to your property to be installed, sanded, stained and finished.
Every one of those steps takes labor, equipment and time. The total cost isn’t necessarily higher than store-bought flooring, but for many people the gap between “I already own these trees” and “this still costs real money and takes a long time” is too big. For a lot of homeowners with a vision of turning storm-damaged trees into something useful and meaningful, the plan ends soon after they start researching it.

Timing Matters More Than You Think
If you’re considering salvaging fallen trees, the clock starts the day they come down. Once a tree is on the ground, fungi and insects start working on it right away.
The NC Forest Service’s storm-salvage timetable gives hardwood intended for veneer and appearance lumber, which includes flooring, a window of about 4 to 6 weeks. After that, blue stain, decay and insect damage make the wood unsuitable for that use. Lower grades hold up longer. Pine framing lumber gets about 3 to 4 months, and pulpwood about 8 to 12 months.
A few things can speed that clock up or slow it down:
- Season. Warm weather speeds up stain and decay. A tree that falls in late fall or winter generally holds up much longer than one that falls in summer.
- Species. White oak, black walnut, cherry and black locust tend to resist decay. Maple, beech, birch, sweetgum and poplar degrade quickly.
- How the tree came down. The NC Forest Service notes that uprooted or leaning trees are more likely to be suitable for lumber than trees that are bent, snapped or splintered, which can have hidden internal damage. A tree with part of its root ball still in the ground can stay alive for a while and keep its wood fresh.
- Ground contact. Logs lying directly on wet soil break down much faster than logs held up off the ground.
- End sealing. Sealing the cut ends of logs soon after cutting helps prevent checking and splitting.
Now that it’s been more than two years since Helene, logs that have been lying on the ground since the storm are generally past flooring grade. That doesn’t mean they’re worthless. Depending on the species and condition, they may still work for rustic or character lumber, live-edge slabs (spalted wood can be especially striking), fence boards, landscape timbers or firewood. A local sawyer can look at the ends and under the bark and tell you what’s still usable.
The Job: Bee Tree Hardwoods to Arbor Zen
This was our first chance to work with the team at Bee Tree Hardwoods. They loaded our 16’ flatbed with their forklift: bundles of red oak flooring and stacks of rough-cut, dried white oak.
The original plan was to deliver straight to the homeowner’s property in Fairview. At that site, our truck-mounted knuckle boom crane would have been the only way to get the load off the truck, since there was no forklift or other equipment on site.
On delivery day, the plan changed. We got word to take the load to Arbor Zen Hardwood Floors, a flooring company in Black Mountain, instead. Arbor Zen is handling some finishing work on the wood before they install it in the homeowner’s house.
At Arbor Zen, we split the offloading between our crane and their forklift. Working together got the load off quickly, and the wood was safely in their hands for the next step.
That kind of flexibility is what our truck is built for. Whether there’s a forklift waiting or nothing on site at all, we can lift, haul and place the load ourselves.




Something to Remember Helene By
Two years after the storm, the scars are still visible all over Western North Carolina, and the memories are still fresh for everyone who lived through it. Years from now, the homeowners who were able to turn their storm-damaged trees into floors, furniture or lumber will have something special to pass down, made from the same trees that stood on their land before the storm.
We have been actively seeking opportunities to work with area residents to salvage trees damaged during Hurricane Helene. We were glad to play a small part in this one.
Lumber and Material Transport in Asheville and Western North Carolina
Need lumber, flooring or other heavy materials picked up from a mill or supplier and delivered to your home or job site? Call Dominic at (828) 357-7553, email dominic@upuplifting.com, or visit upuplifting.com to schedule your next project.
Our Equipment and Considerations for Delivery
Up! Up! Lifting’s crane truck has a short wheelbase with a single rear axle, making it ideal for delivery in our mountain communities. There are locations with steep gravel and unpaved roads that we can’t reach however. We’ll explore this with you, and perhaps do a site visit prior to delivery to confirm we can get in.
A level surface, wide enough for our truck to park is also needed. A standard driveway, about 12 feet wide ,is sufficient to extend the stabilizer legs from the side of the truck, and a 5% gradient is about the extent of incline that we can operate on.
Truck: 2003 International 4300 with a 16’ flatbed
Crane: HIAB XS 099 B3 CLX knuckle boom
| Reach | Rated Capacity |
|---|---|
| 9.9 ft | 6,305 lbs |
| 13.7 ft | 4,453 lbs |
| 19 ft | 3,130 lbs |
| 24.9 ft | 2,336 lbs |
| 31.6 ft | 1,851 lbs |
Up! Up! Lifting is a crane truck service based in Black Mountain, NC, serving the greater Asheville area and Western North Carolina with lifting, transport, and final placement for building materials and heavy deliveries.

