Crane Truck Lifts 1,000-Lb Steel Walkway Platform at Lincolnton, NC Industrial Facility

When a factory in Lincolnton, North Carolina received a freight shipment of a heavy steel walkway platform, they needed more than a standard delivery — they needed a crew that could transfer the load, transport it across uneven ground, and set it precisely in place at a hard-to-reach location on the far side of the building. That’s where Up! Up! Lifting came in. Up! Up! Lifting is a crane truck service based in the Asheville, North Carolina area, providing mobile lifting, loading, and precision placement for commercial and residential customers across Western North Carolina and beyond. This engagement in Lincolnton is a strong example of the kind of multi-step, off-pavement industrial work our crane truck handles with confidence. The Job: Industrial Platform Transfer and Placement The customer’s factory had taken delivery of a steel walkway platform that had shipped from Michigan on a flatbed trailer. The platform — weighing 1,000 pounds — was designed to be mounted in front of an industrial dust collector system. Its purpose: to provide direct access to the filter compartment doors, giving workers a safe, elevated walkway to perform maintenance and inspections. The final installation site was located on the far side of the factory building, away from the delivery point. Reaching it required leaving the pavement entirely and driving up a slight slope across unpaved ground — a common real-world challenge that our crane truck is built to handle. How We Did It: Step-by-Step Step 1 — Transfer from the Delivery Flatbed The steel platform arrived on a standard flatbed trailer from Michigan. Before we could place it, we first had to get it off the delivery trailer and onto our 16-foot flatbed for transport to the installation site. Using our articulated knuckleboom crane, we carefully lifted the 1,000-pound platform from the freight trailer and lowered it onto our truck bed, securing it for transport. Step 2 — Navigate to the Installation Site With the platform loaded, we drove around to the far side of the factory building. The route required leaving the pavement and climbing a slight slope to reach the installation area. Our crane truck is rated to operate on slopes up to 5% grade when the outrigger stabilizers are deployed — making this kind of off-pavement approach a manageable part of the job rather than a showstopper. Step 3 — Rig and Place the Platform Once in position near the dust collector system, we deployed the outrigger stabilizers to level and stabilize the truck for lift operations. To rig the platform, we used a 4-leg chain sling attached to all four corners of the steel structure. This rigging method allowed us to lift the platform securely and keep it balanced and level during the lift — protecting the platform’s paint finish and ensuring it arrived at its final position flat and square. Our knuckleboom crane’s articulated arm gave us the maneuverability to swing the platform into precise alignment with its mounting location, setting it down exactly where it needed to go in front of the filter compartment access doors. Why a Crane Truck Was the Right Tool for This Job This engagement illustrates what makes a crane truck uniquely capable for industrial freight placements. A standard delivery truck could have brought the platform to the property, but it couldn’t lift it, transport it across unpaved ground, or position it with crane precision. A dedicated crane without a flatbed couldn’t have served as the transfer vehicle from the delivery trailer. The combination of crane and flatbed on a single truck is what made this a one-vehicle job. The 4-leg sling approach was also important here: it distributed the load evenly across all four corners, prevented the platform from shifting during the lift, and kept it from swinging out of control — all while protecting a freshly painted surface. About Our Crane Truck: Capabilities and Specs Up! Up! Lifting operates an International 4300 flatbed truck with a HIAB XS 099 B3 CLX articulated knuckleboom crane. Here are the key specifications relevant to jobs like this one: The knuckleboom (articulated) design means the crane arm can fold and extend around obstacles, giving us placement accuracy that a straight telescoping boom cannot match in tight or obstructed workspaces. Serving Lincolnton and Western North Carolina Up! Up! Lifting is based in the Asheville, NC area and regularly travels to commercial and residential job sites throughout Western North Carolina. Lincolnton — located in Lincoln County east of Charlotte — is within our service range, and we are available for hire at industrial, commercial, and residential locations across the greater region. Our service area includes surrounding WNC communities as well as nearby areas in South Carolina, Georgia, and Tennessee. If you have a heavy lift, a tricky placement, or a freight transfer that requires both crane and flatbed capability, we’d welcome the chance to help. Need a Crane Truck for Your Industrial or Commercial Project? If you’re planning a project that requires lifting, transferring, and precisely placing heavy equipment, machinery, or structural components, Up! Up! Lifting is ready to help. We work with factories, contractors, utilities, and property owners across WNC and the surrounding region. Contact us at upuplifting.com/contact or call (828) 357-7553 to discuss your project and get a quote.

Knuckleboom Crane Truck Truss Placement for Hendersonville Construction Contractor

Up! Up! Lifting recently completed a commercial truss lifting and placement engagement for CW Brown Construction in Hendersonville, North Carolina. This project is a strong example of how our knuckleboom crane truck supports Western North Carolina contractors with precise, efficient structural lifts—even when jobsite conditions present real-world challenges. The Contractor’s Challenge: 34 Trusses Across Two Structures CW Brown Construction needed a crane truck solution to lift and precisely place roof trusses on two separate structures at their Hendersonville project. With 17 trusses per building, the scope required careful coordination, accurate crane positioning, and a crew that could communicate and adapt in real time. Trusses demand a high level of precision during placement. Each one must be set exactly where the framing crew needs it so they can nail it off and add stabilization without delay. A missed placement or poor sequencing can ripple through the entire project timeline. Planning the Lift: Staging and Positioning Before the first truss left the ground, Up! Up! Lifting worked with the CW Brown crew to advise on staging locations. Based on our crane’s reach and equipment capabilities, we identified where trusses should be staged on the ground to minimize unnecessary crane movement and maximize lift efficiency. For each structure, we positioned our crane truck in three separate locations around the building. This allowed us to cover all placement zones and set all 17 trusses without relocating more than necessary—keeping the job moving smoothly and safely. Executing the Lifts Once staging was confirmed, the lift sequence was methodical. Each truss was rigged with the appropriate sling hardware, lifted from the ground, and carefully maneuvered into its designated position on the building. The CW Brown crew was ready at each placement point to receive the truss, nail it off, and add the required supports. The first truss on each structure required ample bracing until subsequent trusses could be set and tied together—a routine but important step in structural sequencing that our team and the CW Brown crew coordinated closely. Throughout the engagement, communication between our operator and the construction crew was open and efficient. That kind of real-time collaboration is what allows a lift like this to go quickly and safely. Overcoming Jobsite Conditions Heavy rains the day before the job created a muddy, difficult-to-navigate site. This is a common challenge for Western North Carolina construction projects, and Up! Up! Lifting came prepared. We deployed our ground protection mats, which allowed us to maneuver the crane truck around both structures without getting stuck or causing further site damage. Being prepared for variable ground conditions isn’t optional in this region—it’s a core part of doing the job right. Slow Is Smooth, and Smooth Is Fast This engagement was a textbook example of a principle we live by on every job: slow is smooth, and smooth is fast. We moved deliberately and intentionally throughout the lift sequence, avoiding the rushed decisions that lead to damage, injury, or project delays. The result? All 34 trusses placed across both structures, on time, without a single misstep. Crane Truck Services for Hendersonville and Western North Carolina Contractors Up! Up! Lifting offers crane lifting services for construction contractors throughout Asheville, Hendersonville, and the broader Western North Carolina region. While truss placement is one important application, our knuckleboom crane truck is equally capable of lifting and delivering building materials directly to your jobsite—including lumber bunks, steel beams, precast concrete, HVAC units, and other heavy or awkward materials. If your crew is spending time manually handling materials that a crane could place in minutes, there’s a better way. Contact Up! Up! Lifting for Crane Truck Services in Hendersonville and Asheville NC Planning a structural lift or need crane-assisted material delivery for your next project in Hendersonville, Asheville, or anywhere in Western North Carolina? Contact Up! Up! Lifting today to discuss your project and schedule your crane truck service. Service Areas: Hendersonville, Asheville, Black Mountain, Lake Lure, Fletcher, Mills River, Weaverville, Marshall, and all of Western North Carolina including Henderson, Buncombe, and Haywood Counties.